Error/Status Codes (presented via scroll-wheel illumination)
Bright, Steady Blue - Mouse in Discoverable Mode / Searching for Pairing Host
Flashing Blue - Batteries Nearing Depletion
Dim, Steady Blue - 60 Seconds of Battery Power Remain
Steady Red - Charging Normally
Flashing Red - No Battery Detected
Steady Green - Charge Complete
Flashing Green - Unable to Charge
Flashing Red & Green - No USB Power Detected - Power Mouse OFF & Firmly Reconnect USB Cable
Charging Instructions
Switch mouse OFF - the power switch for the BT300 is a sliding-type located on the bottom.
Connect USB cable to mouse (be sure mouse end of cable is FULLY inserted, connector's grip should touch mouse housing).
Do not be afraid to push the connector that last millimeter to fully insert it.
Scroll wheel should flash green and red for 2-3 seconds, then it will illuminate steady red to indicate that the mouse is charging.
You can NOW switch the mouse ON and use it while it's charging. When the scroll wheel illuminates steady green, charging is complete, and cable can be disconnected without switching the mouse off.
Mouse Reset Procedure
Place power switch in the ON position.
Remove batteries for 30 seconds (leave power switch in ON position).
Reinstall batteries and test mouse.
Bluetooth Troubleshooting Guide
Please choose your operating system below to view the troubleshooting guide.
